Plumbing Services in New York City

Our Plumbing Services

Complete Plumbing System Replacement

Pre-war NYC buildings frequently contain galvanized steel supply lines and cast iron drain stacks that are 80–100+ years old. These corroded systems cause low water pressure, discolored water, frequent leaks, and eventual pipe failure. We replace entire plumbing systems with copper or PEX supply lines and PVC or cast iron drain piping — bringing your property into compliance with current NYC plumbing code. Full system replacement is typically performed during apartment or brownstone gut renovations when walls are already open.

Kitchen Plumbing

Kitchen renovations require plumbing rough-ins for sinks, dishwashers, ice makers, pot fillers, and garbage disposals. We relocate supply and drain lines for new layouts, install proper venting, and connect gas lines for ranges and cooktops. All kitchen plumbing work is coordinated with other trades to maintain project schedules.

Bathroom Plumbing

Bathroom renovations depend on reliable plumbing for showers, tubs, toilets, sinks, and heated floor systems. We rough-in new drain and supply lines, install mixing valves for temperature control, and connect all fixtures with proper shut-off valves and access panels. Our waterproofing coordination ensures drain connections are properly sealed before tile installation.

Fixture Installation and Replacement

We install and replace all residential plumbing fixtures — toilets, sinks, faucets, showerheads, tubs, bidets, and water filtration systems. Fixture installation includes proper supply connections, drain sealing, and caulking for a finished, leak-free result.

Water Heater Installation

We install tankless and traditional tank water heaters sized appropriately for your property. For townhouses and brownstones with multiple bathrooms across several floors, we design recirculation systems that deliver hot water quickly at every fixture

Pipe Repair and Leak Detection

We locate and repair leaks in supply lines, drain pipes, and fixture connections. For concealed leaks causing water damage, we use non-invasive detection methods before opening walls, minimizing unnecessary demolition.

Gas Line Installation and Repair

We install and repair gas lines for cooking ranges, dryers, fireplaces, and outdoor grills. All gas work is performed by licensed technicians and inspected per DOB requirements.

Drain Cleaning and Sewer Line Service

We clear clogged drains in kitchens, bathrooms, and main sewer lines using professional equipment. For recurring issues, we inspect lines with cameras to identify root causes such as root intrusion, pipe collapse, or grease buildup.

Modern bathroom with white marble walls, a freestanding bathtub, a black vanity with a mirror, and potted plants near a window.

How Much Do Plumbing Services Cost in NYC?

Plumbing costs in NYC vary based on the scope of work and building type. Here are general ranges:

Fixture Replacement (toilet, faucet, sink): $300–$1,500 per fixture

Water Heater Installation: $2,000–$6,000

Kitchen or Bathroom Rough-In: $3,000–$10,000

Full System Replacement (apartment): $15,000–$40,000

Full System Replacement (brownstone/townhouse): $30,000–$80,000+

NYC-specific cost factors include:

  • Building management coordination for water shutdowns in co-ops and condos
  • DOB plumbing permit fees and inspection costs
  • Access challenges in pre-war buildings with concealed plumbing behind plaster walls
  • Stack work requiring coordination with neighboring units

We provide detailed estimates before beginning any plumbing work.

Plumbing for Every NYC Property Type

A modern bathroom with a round mirror, wall lights, gray vanity, white countertop, toilet, bathtub with herringbone tile walls, black fixtures, and a window.

Apartment Plumbing

Apartment plumbing in NYC involves working with shared stacks, coordinating water shutdowns through building management, and fitting modern fixtures within space constraints. Our experience with managed buildings means we know how to schedule stack tie-ins efficiently.

Brownstone and Townhouse Plumbing

Multi-floor brownstone and townhouse plumbing requires vertical distribution across 3–5 floors, proper sizing for simultaneous multi-fixture use, and coordination with structural work when routing new lines through existing framing.

Co-op and Condo Plumbing

Co-op and condo plumbing work requires building approval, scheduled access to shared infrastructure, and compliance with building-specific plumbing requirements. We coordinate all logistics with building management.

Why Melani General Contractor for Plumbing Services

NYC Licensed General Contractor (\#626219)

Our active license covers all plumbing work performed under our supervision. Valid through December 2028.

22+ Years of Verified Experience

Deep familiarity with NYC’s diverse plumbing systems — from pre-war cast iron and galvanized to modern PEX and PVC.

EPA Lead-Safe Certified (NAT-F277952-1)

Proper handling procedures for lead-soldered joints common in older NYC plumbing systems.

Fully Insured

Comprehensive general liability and workers’ compensation insurance.

NYC Code Compliant

All work meets current NYC plumbing code requirements and passes DOB inspection.

Our Plumbing Service Process

Assessment

We evaluate your plumbing system, identify issues, and discuss your goals.

Estimate

We provide a detailed scope of work with itemized pricing.

Permits

We file DOB plumbing permits when required.

Installation

Our plumbers complete all work according to plan and code requirements.

Inspection and Testing

We pressure-test all new installations, coordinate DOB inspections, and verify leak-free operation before closeout.

Additional Renovation Services

Apartment Renovation

Apartment Renovation

Bathroom Renovation

Brownstone Renovation

Co-op & Condo Renovation

Electrical Services

Flooring Installation

Modern dining and living area divided by a concrete pillar, featuring mixed contemporary furniture, pendant lights, a black cabinet, and a green potted plant.

General Contracting

Gut Renovation

Modern two-story house with white and wood exterior, large windows, landscaped garden, and paved driveway.

Home Renovation

Modern kitchen with white cabinets, marble island, stainless steel appliances, pendant lights, and wood flooring.

Kitchen Remodeling

Loft Renovation

A spacious loft with white walls, wooden ceiling beams, large skylights, and windows letting in natural light; a potted plant is in the corner.

Painting Services

Townhouse Renovation

Areas We Serve Across New York City

See What Our Customers Have To Say

Schedule Plumbing Service

Frequently Asked Questions About Plumbing Services in NYC

DOB plumbing permits are required for new installations, fixture additions, pipe replacements, and any work connecting to or modifying the building’s waste or water systems. Minor repairs and fixture swaps typically do not require permits.

Signs include low water pressure, discolored water, frequent leaks, visible corrosion on exposed pipes, and water stains on ceilings or walls. If your building has galvanized supply lines (silver-colored pipes), they are likely 60–100+ years old and due for replacement.

Full plumbing replacement in a NYC apartment typically ranges from $15,000–$40,000 depending on apartment size, number of fixtures, and building access requirements. We provide detailed estimates after assessing your specific situation.

Yes. We coordinate stack access, water shutdowns, and tie-ins with building management and neighboring units. Our experience in co-op and condo buildings means we handle these logistics efficiently.

We install copper and PEX for supply lines and PVC or no-hub cast iron for drain lines, depending on building code requirements and existing infrastructure. We recommend the best materials for your specific application.

We prioritize urgent plumbing issues for existing clients and renovation projects. For emergency situations, call our office at (718) 283-4154 and we’ll respond as quickly as possible.

Scroll to Top